FK Series Refrigeration Machines | FRIGOBLOCK

FK Series

FK 13*

FK 24

FK 25

FK 25 i

FK 35 i

http://FK-Series%20FRIGOBLOCK%20Michael%20Ward%20Limited

Main Features

Quick repair and high readiness for operation by quick-change system
Evaporator integrated in the housing for full loading height
Optional 4-way heat pump control for rapid defrost cycles
Little maintenance due to hard-wearing components
Optional 2-speed control for low noise and fast run mode
Low noise due to large, slow-speed fans
Encapsulated isolated housing for thermal separation to the body
Maximum payload by light-weight construction
Optional hydraulic tilting mechanism for low box heights
Long life
Environmentally compatible refrigerant R410A

Swipe table sideways

For medium-class bodies from about 5 – 7.5 m inside length for distribution service and certain requirements on temperature

* Optional SL version with 2-speed control, high speed: technical specifications as above; low speed: approx. 60% of the above capacity

Refrigerant	H-CFC	R410A
Refrigerant compressor	Cylinder Displacement Speed	2 24.8 1,750	– m3/h rpm
Electric motor	Output Speed	7.5 1,450	kW rpm
Evaporator	Heat exchange surface Cross-flow fan øxL Motor output Air volume Discharge velocity Throw, without duct	41.6 160×720 700 2,800 12-16 7-8	m² mm W m3/h m/sec m
Condenser	Heat exchange surface Axial fan Ø	38.6 386/348	m² mm
Alternator	Capacity	17	kVA
Mains operation	Fuse (slow)	20	A
Weight	Refrigeration machine Alternator	210 76	kg kg

Technical specifications at 60% of the truck engine rated speed and on mains operation, 400/415 V, 50 Hz Specifications are subject to change.

Swipe table sideways

DOWNLOAD BROCHURE

Main Features

Serially with 4-way heat-pump control for rapid defrost cycles
Evaporator integrated in the housing for full loading height
Encapsulated isolated housing for thermal separation to the body
Optional 2-speed control for low noise and fast run mode
Little maintenance due to hard-wearing components
Low noise due to large, slow-speed fans
Quick repair and high readiness for operation by quick-change system
Maximum payload by light-weight construction
Optional hydraulic tilting mechanism for low box heights
Long life
Environmentally compatible refrigerant R410A

Swipe table sideways

For medium to heavy-class bodies from about 6 – 8 m inside length for heavy distribution service and certain requirements on temperature and multi-compartment distribution.

Refrigerant	H-CFC	R410A
Refrigerant compressor	Cylinder Displacement Speed	2 30.1 1800	– m3/h rpm
Electric motor	Output Speed	9 1,450	kW rpm
Evaporator	Heat exchange surface Cross-flow fan øxL Motor output Air volume Discharge velocity Throw, without duct	65 160×864 700 4,200 14-18 8-9	m² mm W m3/h m/sec m
Condenser	Heat exchange surface Axial fan Ø	70.2 440/386	m² mm
Alternator	Capacity	24	kVA
Mains operation	Fuse (slow)	20	A
Weight	Refrigeration machine Alternator	280 98	kg kg

Technical specifications at 60% of the truck engine rated speed and on mains operation, 400/415 V, 50 Hz Specifications are subject to change.
Date: 5/2009

Swipe table sideways

DOWNLOAD BROCHURE

Main Features

Serially with 4-way heat-pump control for rapid defrost cycles
Evaporator integrated in the housing for full loading height
Encapsulated isolated housing for thermal separation to the body
Optional 2-speed control for low noise and fast run mode
Little maintenance due to hard-wearing components
Low noise due to large, slow-speed fans
Quick repair and high readiness for operation by quick-change system
Maximum payload by light-weight construction
Optional hydraulic tilting mechanism for low box heights
Long life
Environmentally compatible refrigerant R410A

Swipe table sideways

For medium to heavy-class bodies from about 6 – 8 m inside length for heavy distribution service and certain requirements on temperature and multi-compartment distribution.

Refrigerant	H-CFC	R410A
Refrigerant compressor	Cylinder Displacement Speed	4 40.5 1,450	– m3/h rpm
Electric motor	Output Speed	11 1,450	kW rpm
Evaporator	Heat exchange surface Cross-flow fan øxL Motor output Air volume Discharge velocity Throw, without duct	65 160×864 700 4,200 14-18 8-9	m² mm W m3/h m/sec m
Condenser	Heat exchange surface Axial fan Ø	70.2 440/440	m² mm
Alternator	Capacity	24	kVA
Mains operation	Fuse (slow)	25	A
Weight	Refrigeration machine Alternator	290 98	kg kg

Technical specifications at 60% of the truck engine rated speed and on mains operation, 400/415 V, 50 Hz Specifications are subject to change.
Date: 5/2009

Swipe table sideways

DOWNLOAD BROCHURE

Main Features

Inverter controlled machine with highest energy efficiency and lowest consumption
Evaporator integrated in the housing for full loading height
Alternative cooling and defrosting of the evaporators possible
Up to 3 inside evaporators for bodies with longitudinal division
Low-noise / energy save mode
Maximum defrost rate mode
Little maintenance due to hard-wearing components
Encapsulated isolated housing for thermal separation to the body
Quick repair and high readiness for operation by quick-change system
Maximum payload by light-weight construction
Optional hydraulic tilting mechanism for low box heights
Long life
Environmentally compatible refrigerant R410A
Serially with 4-way heat-pump control for rapid defrost cycles

Swipe table sideways

For medium to heavy-class bodies from about 6 – 8 m inside length for heavy distribution service and certain requirements on temperature and multi-compartment distribution.

Refrigerant	H-CFC	R410A
Refrigerant compressor	Cylinder Displacement Speed	4 14.0-55.9/ (69.8) 500 / 2000 / (2500)	– m3/h rpm
Electric motor	Output	11	kW
Evaporator	Heat exchange surface Cross-flow fan øxL Motor output Air volume Discharge velocity Throw, without duct	2×35 2×864 2×0.75 >8,500 14-18 10	m² mm W m3/h m/sec m
Condenser	Heat exchange surface Axial fan Ø	72 2×440	m² mm
Alternator	Capacity	30.0/37.5	kVA
Mains operation	Fuse (slow)	32	A
Weight	Refrigeration machine Alternator	410 60	kg kg

* Average refrigeration capacity coefficient in energy save mode / standard inverter mode in kWh refrigeration per one litre of diesel fuel
** Data in brackets for recuperation (braking/accelerating) mode without any fuel consumption at compressor speeds of 2,500 rpm.
Specifications are subject to change
Date: 6/2013

Swipe table sideways

DOWNLOAD BROCHURE

Main Features

Inverter controlled machine with highest energy efficiency and lowest consumption
Mode for maximum cooling rate
Low-noise / energy save mode
Up to 3 inside evaporators for bodies with longitudinal division
Alternative cooling and defrosting of the evaporators possible
Quick repair and high readiness for operation by quick-change system
Evaporator integrated in the housing for full loading height
Encapsulated isolated housing for thermal separation to the body
Low noise due to large, slow-speed fans
Little maintenance due to hard-wearing components
Maximum payload by light-weight construction
Long life
Optional hydraulic tilting mechanism for low box heights
Environmentally compatible refrigerant R410A
Serially with 4-way heat-pump control for rapid defrost cycles

Swipe table sideways

For medium to heavy-class bodies from about 6 – 8 m inside length for heavy distribution service and certain requirements on temperature and multi-compartment distribution

		2 evaporators	3 evaporators
Refrigerant	H-CFC	R410A	R410A
Refrigerant compressor	Cylinder Displacement Speed	4 19.5-78.0/ (97.5) 500 / 2000 / (2500)	4 19.5-78.0/ (97.5) 500 / 2000 / (2500)	– m3/h rpm
Electric motor	Output	15	15	kW
Evaporator	Heat exchange surface Cross-flow fan øxL Motor output Air volume Discharge velocity Throw, without duct	27+60 620+1,340 0.75+1.5 >10,000 14-18 10	3×27 3×620 3×0.75 >10,000 14-18 10	m² mm W m3/h m/sec m
Condenser	Heat exchange surface Axial fan Ø	82 2×440 + 386	82 2×440	m² mm
Alternator	Capacity	30.0/37.5	30.0/37.5	kVA
Mains operation	Fuse (slow)	32	32	A
Weight	Refrigeration machine Alternator	450 60	450 60	kg kg

* Average refrigeration capacity coefficient in energy save mode / standard inverter mode in kWh refrigeration per one litre of diesel fuel
** Data in brackets for recuperation (braking/accelerating) mode without any fuel consumption at compressor speeds of 2,500 rpm.
Specifications are subject to change
Date: 6/2013

Swipe table sideways

DOWNLOAD BROCHURE